The Makita DLX2412TJ twin kit features two heavy duty and compact tools – DHP486 Combi Drill & DTD172 Impact Driver.Supplied with 2x 18v 5.0Ah BL1850 Batteries, 1x DC18RC Compact Charger and 1x Makpac Connector Carry Case (821551-8 Type 3).DHP486 18V LXT BRUSHLESS HEAVY DUTY COMBI DRILLThe Makita DHP486 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications.DHP486 FEATURESMassive drilling capacity with 152mm hole saw & 50mm auger bit capacityCompact overall length of only 178mm for use in narrow work spacesHigh powered Brushless Motor produces 130Nm peak torqueHigh durability aluminium gear housingMechanical 2 speed gearing with all metal gear constructionForward / reverse rotationSingle sleeve keyless chuck allows for easy bit installation/removal by one handElectric brakeVariable speed control by triggerBest possible ergonomic handle for drill-driver applicationsLED job lightBelt clipXPT – Extreme Protection TechnologyDHP486 SPECIFICATIONVoltage: 18vSoft Application Max Torque (Nm): 65Hard Application Max Torque (Nm): 130Torque Settings: 21 DrillBrake Type: ElectricNo. of Gears: 2LED Job Light: Yes / Twin / Pre-glow / After-glowBattery Capacity Indicator: NoBattery Compatibility: 18v Lithium-Ion (LXT)Rotation: Forward / ReverseVariable Speed Control Trigger: YesNo Load Speed (RPM) High: 0-2100No Load Speed (RPM) Med: N/ANo Load Speed (RPM) Low: 0-550Chuck Type: 3-Jaw / Single Sleeve Keyless / All MetalChuck Capacity (mm): 13Screw Capacity: Machine Screw (mm): 6Screw Capacity: Wood Screw (mm): 10 x 90Drill Capacity: Concrete (mm): 16Drill Capacity: Metal (mm): 13Drill Capacity: Wood (mm): 76Impact Rate (BPM) High: 0-31500Impact Rate (BPM) Med: N/AImpact Rate (BPM) Low: 0-8250Overall Length (mm): 178Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2.3Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.7Brushless Motor: YesDHP486 NOISE & VIBRATIONSound Pressure Level (LpA): 84 dB (A)Sound Power Level (LWA): 95 dB (A)Sound Uncertainty (K): 3 dB (A)Drilling Concrete Vibration Emission (ah): 8.0 m/s²Drilling Concrete Vibration Uncertainty (K): 1.5 m/s²Drilling Metal Vibration Emission (ah): 2.5 m/s²Drilling Metal Vibration Uncertainty (K): 1.5 m/s²DTD172 18V LXT CORDLESS BRUSHLESS IMPACT DRIVERThe DTD172 is a brushless impact driver powered by an 18v LXT Li-Ion battery.Key features include a LED job light with pre-glow & after glow function, and a new one-touch bit installation.DTD172 FEATURESElectric brakeVariable speed control by triggerReverse switchQuick mode switching buttonLED job light with pre-glow and after glow functionSlim tool bodyAnti bit-wobbling structureCompact tool body with a shorter overall length of 114mmNew one-touch bit installationElectronic 4 stage impact power selectionErgonomically designed handleDTD172 SPECIFICATIONVoltage: 18vMax Fastening Torque (Nm): 180Brake Type: ElectricBattery Compatibility: 18v Lithium-Ion (LXT)Variable Speed Control Trigger: YesMachine Screw Capacity: M4-M8Standard Bolt Capacity: M5-M16High Tensile Bolt Capacity: M5 – M14Coarse Thread Length Capacity (mm): 22-125Max. Impacts Per Minute (ipm): 0-3800Driving Shank: 6.35mm 1/4″ HexNet Weight: 1.2 – 1.5 kgBrushless Motor: YesDTD172 NOISE & VIBRATIONVibration K Factor: 1.5 m/sec²Noise Sound Pressure: 97 dB(A)Noise Sound Power: 108 dB(A)Noise K Factor: 3 dB(A)
